网格划分问题：Initialization failed;perturb boundary nodes and try again. Initi

sheldy · 发表于 2012-5-28 22:35

本帖最后由 sheldy 于 2012-5-28 22:36 编辑

出错信息如下：
Initialization failed;perturb boundary nodes and try again.
Initialization failed to mesh 1 nodes.
ERROR:TG_Mesh_domain failed with error code 1.
ERROR: Tetrahedal meshing has failed for volume volume.1.
This is usually caused by problems in the face meshes.
Check the skewnesses of your face meshes and make sure
the face mesh sizes are not too large in areas of
small gaps.

不知如何解决？

yudi · 发表于 2012-5-31 09:11

有些面的网格没有划分好，质量太差

chongdaql · 发表于 2012-6-7 09:43

这种问题主要是要对网格的划分步骤要清楚，自习的捋一遍。

zz60 · 发表于 2012-6-16 17:47

gambit这种情况下网格质量不会太高

帐号		自动登录	找回密码
密码			快速注册

[gambit] 网格划分问题：Initialization failed;perturb boundary nodes and try again. Initi

站长推荐 /1